Worldwide Shipping
Showing 13–24 of 122 results
1500W DC DC Boost Converter featuring adjustable 12-90V output, constant current and constant voltage regulation, high efficiency up to 97%, and 30A input capacity for charging, solar and DIY applications.
♦ Specifications
Non-Isolated power supply boost converter
Multi Turn Potentiometer to control the output
Maximum Power rating: 150W
Current Rating: 6A
Adjustable Output Voltage
Comes with Mounting Screws
♦ Specifications
Output power: 1800W
Input voltage range: 10V-60V
Output voltage range: 12V-90V
Input current: 40A
Output current: 20A
Low battery protection: yes (9-50V adjustable)
Working temperature: -40~+85 degrees
Fan activation temperature: 60 degrees (These units are equiped with an onboard fan which will automatically activate when a sensor on the board detects tempritures of 60 degrees or higher)
Working frequency: 150KHz
Conversion efficiency: 92%-97% (efficiency is related to input, output voltage, current, and pressure difference)
Input overcurrent protection: Yes (inputs over 25/35A will trigger automatic protection, and the module won’t boost)
Short circuit protection: Yes (input 30A fuse)
18650 battery holder for 1S, 2S, 3S and 4S series configurations. Spring contacts and wire leads make it easy.
18650 cell holder for 1–4 cells in parallel. Pre-wired leads, spring contacts and open design for DIY electronics, portable devices and battery-powered projects.
♦ Specifications
Low-level trigger signal
Operating Voltage: 12V DC
Equipped with high-current relay: 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
A freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
2.4 Inch TFT Display Shield with responsive touch control, vibrant color display and Arduino compatibility. Perfect for UNO, Mega 2560, DIY electronics and embedded projects.
Upgrade your MG995 and MG996R servo projects with this 25T metal servo horn. Durable replacement arm for RC robots, Arduino projects, and DIY applications.
3:1 Adhesive Heat Shrink Tubing Kit with 140pcs assorted sizes. Provides waterproof insulation, cable protection and reliable wire repair for electronics and DIY projects.
3:1 heat shrink tubing provides reliable insulation and cable protection with a wide shrink ratio. Available in red 9.5mm and 25.4mm sizes, ideal for wires, cables, connectors and DIY electrical projects.
3.5 Inch TFT LCD Touch Screen for Raspberry Pi with 320×480 resolution, responsive touch control and GPIO interface. Ideal for DIY projects, monitoring systems and embedded applications.
♦ Specifications
Maximum switching voltage: 250VAC / 30VDC
Maximum switching current: 10A
Each relay features an LED indicator
Dimensions: 70*53mm
No products in the cart.