Showing 1–12 of 21 results
-
$0.35
♦ Specifications
Low-level trigger signal
Operating Voltage: 12V DC
Equipped with high-current relay: 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
A freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
-
$4.82
♦ Specifications
Number of channels : 16
Operating voltage : 12V
Max. current : 20mA
Trigger voltage : 12V
Switching voltage : 250V at 10A
Size: 179*90*19mm
Weight: 230g
Equipped with high-current relay
It can control both AC and DC appliances such as Motors, lights, fans, etc.
-
$1.10
♦ Specifications
Number of channels : 4
Operating voltage : 12V
Max. current : 20mA
Trigger voltage : 12V
Switching voltage : 250V at 10A
Equipped with high-current relay
It can control both AC and DC appliances such as Motors, lights, fans, etc.
-
$1.75
♦ Specifications
Number of channels : 6
Operating voltage : 12V
Max. current : 20mA
Trigger voltage : 12V
Switching voltage : 250V at 10A
Equipped with high-current relay
It can control both AC and DC appliances such as Motors, lights, fans, etc.
-
$2.93
♦ Specifications
Number of channels : 8
Operating voltage : 12V
Max. current : 20mA
Trigger voltage : 12V
Switching voltage : 250V at 10A
Equipped with high-current relay
It can control both AC and DC appliances such as Motors, lights, fans, etc.
-
$0.01 – $0.03Price range: $0.01 through $0.03
12x12x7.3mm tactile push button switch with colorful caps for Arduino, PCB projects and DIY electronics. Available in red, black, blue, green, yellow and white caps.
-
$0.35
♦ Specifications
Low-level trigger signal
Operating Voltage: 12V DC
Equipped with high-current relay: 10A@250VAC / 10A@30VDC
It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
A freewheeling diode to protect your microcontroller
Input Signal Pin connected to Burg stick for easy accessibility
LED Status indicators to indicate the relay ON/OFF status
-
$1.22
♦ Specifications
Maximum switching voltage: 250VAC / 30VDC
Maximum switching current: 10A
Each relay features an LED indicator
Dimensions: 70*53mm
-
$0.36
♦ Specifications
Trigger Voltage: 5 VDC
Trigger Current : 20 mA
Maximum Switching Voltage: 250VAC@10A; 30VDC @10A
Single Pole Double Throw (SPDT) Configuration
Power supply indicator lamp
Brand: TongLing/BESTEP/Generic
-
$4.62
♦ Specifications
16 CH With Optocoupler
– The control signal voltage range: the trigger signal is low 0-2V; high voltage must not exceed 5V.
– The use of the industry’s top quality optocoupler isolation, strong anti-interference ability, stable performance; the trigger current is only 3mA.
– 1-16 road can be any full on / off, or any road.
– Output Type: AC 220V 10A directly connected or DC30V 10A load.
Electrical Parameters:
Supply voltage: 5V (DC)
Supply Current: More than 200mA
Each relay can load: 250V 10A (AC) or 30V 10A (DC)
-
$1.73
♦ Specifications
Supply voltage VCC: 5 V
Activated with the low-status
Relay Coil voltage: 5 V
The maximum voltage of contacts: 250 VAC, 125 VDC*
Maximum current: 10 A
Optoelectronic insulation
6 LEDs signaling the activation of relays
The dimensions PCB: 10.3x 5.27cm
Weight: 82 g
-
$3.42
♦ Specifications
Operating Voltage: 5V DC
Trigger Current: 5mA
Relay Maximum Contact Voltage: 250VAC, 30VDC
Relay Maximum Current: 10A
Trigger Mode: Active Low/high
Dimensions: 142mm x 50mm
Weight: 115.3 grams
Indicator LEDs: Power supply indicator and relay status indicators
